Below are articles pertaining to Computational Fluid Dynamics (CFD) at Hatch which have been published in journals and/or conference proceedings.
Application of CFD Modeling to the Design of Fume Control Systems in the Steel Industry
Authors: T. Plikas, J. Woloshyn, D. Johnson
Iron and Steel Technology, Volume 4, #11, November 2007
Abstract
Casthouse Ventilation Design for the Production of Air-Cooled Aluminium Sows
Authors: T. Plikas, T. Cesta, L. Gunnewiek, J. Vanasse
International Journal of Ventilation, Volume 9; #1, June 2010
Abstract
CFD in Autoclave Circuit Design
Authors: L. Oshinowo, L. Gunnewiek, K. Fraser
Hydrometallurgy 2003 - Proceedings of the 5th International Symposium; August 2003
Abstract
Designing Ventilation Systems for Potrooms Using Computational Fluid Dynamics Modeling
Authors: T. Plikas, L. Gunnewiek
Abstract
Digester Design Using CFD
Authors: J. Woloshyn, L. Oshinowo, J. Rosten
135th Annual Meeting - Proceedings of the Technical Sessions presented by the TMS Aliminum Committee, 2006; pp 939-944
Abstract
Flash Vessel Process Design
Authors: L. Gunnewiek, U. Shah
6th International Conf on CFD in Oil & Gas, Metallurgical and Process Industries, SINTEF/NTNU; Trondheim Norway
Abstract
Heat Transfer Considerations for DC Busbars Sizing
Authors: A. Felipe Schneider, T. Plikas, D. Richard, L. Gunnewiek
TMS 2009 Annual Meeting and Exhibition; February 2009; pp 539-544
Abstract
Enhanced Problem Solving; The Integration of CFD and Other Engineering Applications
Authors: R. Haywood, W. Taylor, T. Plikas, N. Tedford, D. Warnica
Mixing System Design for the Tati Activox® Autoclave
Authors: G. Nel, T. Plikas, U. Shah, L. Zunti, M. Bellino, M. Nicolle, H. Pieterse
SIAMM - Journal of The South African Institute of Mining and Metallurgy 2009, pp 357-364
Abstract
Multiphase Modeling in Metallurgical Plant Design
Author: L. Oshinowo
5th International Symposium on the Multiphase Flow: Heat Mass Transfer and Energy Conversion; Xian, China; July 2005
Abstract
The Predictive Control of Furnace Tapblock Operation Using CFD and PCA Modeling
Authors: T. Plikas, L. Gunnewiek, T. Gerritsen, M. Brothers, A. Karges
JOM, October 2005, pp 37-43
Abstract
Using CFD To Reduce Commissioning Time for Electrostatic Precipitators
Authors: R. Haywood, G. Brown, L. Irons, M. Stark
5th International Conference on CFD in the Process Industries, CSIRO; Melbourne, Australia; December 2006
Abstract
Optimization of Settling Pond Effluent Quality
Authors: J. Zhang, S. Daughney, T. Plikas, L. Gunnewiek, T. Miller, A. Lagace, D. Yaschyshyn
8th International Conference on Acid Rock Drainage; June 2009
Abstract
