Articles

Below are articles pertaining to Technologies at Hatch which have been published in journals and/or conference proceedings.

Comparing the Accuracy of Acousto Ultrasonic-Echo (NDT), Finite Element Analysis (FEA), and Drilling When Obtaining a Blast Furnace Refractory Lining Wear Profile
Authors: A. Sadri,  P. Gebski, A. Rampersad, P. Marinelli and E. Doro 
Journal of Iron and Steel Technology, Vol. 7 no. 3, March 2010, pp. 70-81
Abstract

Material Selection for Carbon Dioxide Mineralization Plant
Authors: G. Moe, H. Boerrigter, B.C.M. Veen, A.P. Mutsaars
Corrosion Solutions 2009, September 20-24, 2009
Abstract

Quality Assurance Activities for Corrosion Resistant Membranes in Pressure Vessels
Authors: J. Wei, G. Moe, M. Pearson
ASME 2010 Pressure Vessels and Piping Conference, in Bellevue, Washington
Abstract

Economics of Slag Heat Recovery from Ferronickel Slags
Authors: L. Rodd, T. Koehler, C. Walker, N. Voermann
49th Annual Conference of Metallurgists (COM 2010), Vancouver, Canada, October 2010
Abstract

Plate Mill Thickness Control Upgrade at BlueScope Steel
Authors: G. Boulton, R. Davies, J. Edwards, K. Hochstetter, P. Thomas and T. Jojas
AISTech, January 2010

A Particle Swarm Optimisation Approach to Reinforced Concrete Beam Design according to AS3600
Authors: T.J. McCarthy and S. McCluskey, University of Wollongong
The First International Conference on Soft Computing Technology in Civil, Structural and Environmental Engineering, Funchal, Madeira, Portugal 1-4 September 2009
Abstract

A Cold Mill Setup Model with Finesse
Authors: G.Conway, R.Davies, J.Edwards, S.Paardekooper, N.Scopulovic (Industrial Automation Services Pty Ltd.) S.Starr (California Steel Industries)

Abrasive jet micromachining of acrylic and polycarbonate polymers at oblique angles of attack 
Authors: H.Getu, A.Ghobeity, J.K.Spelt, M.Papini

Abrasive jet micro-machining of planar areas and transitional slopes
Authors: A.Ghobeity, J.K.Spelt and M.Papini

An Analytical Model of the Effect of Particle Size Distribution on the Surface Profile Evolution in Abrasive Jet Micromachining
Authors: A.Ghobeity, D.Ciampini, and M.Papini

CO₂ Capture and Sequestration - Implications for the Metals Industry
Authors: M.Berkley, J.Berzansky, D.Clarry, J.Sarvinis

Pilot Testing of the Hatch Continuous Steelmaking Technology
Authors: F.Wheeler, F.Atkinson, I.Gordon, S.Broek, V.So, M.Barati (UoT)

The Successful Piloting of CRISP, The Innovative Continuous Steelmkaing Technology
Authors: F. Wheeler, Y. Gordon, S. Broek, I. Cameron
2009 Conference on Innovation in EAF and in Steelmaking Processes, May, 2009
Abstract

See more articles specific to our technologies:

Autoclave

Coilbox

Electric Furnaces

Electrolytic MacroEtcher

Fluidization Technologies

Force Feed Forward Automatic Gage Control System (FFF)

Furnace Technology

Hinged Ladle Lid

HydroVantage

Integrated Electric Furnace Control System (IFC)

Non Destructive Testing (NDT) Technology

Smart Predictive Line Controller (SPLC)

Tapblock System

Vista DSS